Tìm nhanh Forum - tại đây !!

↑ ↓
Welcome

+ Chào mừng bạn đến với diễn đàn thông tin dịch vụ Việt Nam

+ Chúng tôi có tất cả các dịch vụ Online từ xa qua Teamview - Active box , Dongle , Rom Test chuẩn cứu máy - Và thông tin giải pháp phần mềm miễn phí

Meizu M5 Note xóa xác minh tài khoản Flyme ok.

Thảo luận trong 'XIAOMI' bắt đầu bởi Tuan Pham, 20/7/18.

  1. Tuan Pham

    Tuan Pham
    Quản lý forum

    - Meizu M5 Note xóa xác minh tài khoản Flyme thành công qua Teamviewer.
    - Meizu M5 Note remove accout Flyme done via Teamviewer.
    Mã:
    Disconnect Mobile...
        Re-Put the Mobile Bettery...
        Then Connect your Phone to Computer again....
        Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
        Get Mobile Port is:  COM3
    >>> Device driver identification:
        MTK USB Port
    >>> Mobile Has Connect...
        Model : m5 note
        CPU_NAME: MT6755
    >>> Reading Mobile Hardware Info...Success
        HW_Inf:  8A00    SW_Inf:  CB00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
        Mobile phone status:SYNC...
        Mobile phone status swtich to :brom...Success
    Success
        Make sure Mobile status has in :brom...
        Init Mobile BOOT2 ...
        =====================Flash Type(eMMC)==============
        Flash   Size: 0x0000000747C00000 -> 29820M
        Flash     ID: 0x150100525831424D
        Flash   Name: Samsung_Unknow
        Flash symbol: RX1BMB
    >>> Swich Mobile to Hight Speed Re\Wr Port...
        Get Mobile Port is:  COM7
    >>> Device driver identification:
        MediaTek DA USB VCOM (Android)
    >>> Reading Mobile Map Data...Success
    >>>>Geting Mobile info data...
        ADD(HEX):0x0024BC8000    Size(HEX):0x0000700000   
    >>>>Writeing Mobile info data...
        This Phone Support CDMA
        SN has Change to :621HECSM26RC
        SN has Change to :621HECSM26RC
    >>>>Formating Mobile USER Data...
        ADD(HEX):0x00EC000000    Size(HEX):0x065ABFBE00
        Corresponding operation completed!!!
        After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
    [​IMG]
     

trang này