Tìm nhanh Forum - tại đây !!

↑ ↓
Welcome

+ Chào mừng bạn đến với diễn đàn thông tin dịch vụ Việt Nam

+ Chúng tôi có tất cả các dịch vụ Online từ xa qua Teamview - Active box , Dongle , Rom Test chuẩn cứu máy - Và thông tin giải pháp phần mềm miễn phí

Samsung A70 A705F A705FN Remove Knox GPAY

Thảo luận trong 'SAMSUNG' bắt đầu bởi kithuatmobile, 12/11/19.

Tags:
  1. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Samsung A70 A705F A705FN Remove Knox GPAY

    Samsung A70 A705F A705FN Khóa Knox GPAY,Mở Khóa Knox Thành Công
    Samsung A70 A705F A705FN Remove Knox Via Testpoin

    @thanhnamPDAviet
    Checking for existing devices...Found
    Port : Qualcomm HS-USB QDLoader 9008 (COM40)
    Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
    Opening Port...OK
    Init Handshake Sequence...OK
    Hardware ID : E1500900 [E1500900] 00002000
    OPK_DATA : E6C467292D5EE31FC2928B69166625C3E8C02016F4830F274D39A8AC38B05A4E
    Initializing Protocol...OK
    Sending Loader [prog_firehose_ddr.elf]...Done
    Executing Loader...OK
    Detecting Chip Type...OK
    Using Alternate Method...
    Hardware : E1500900, UFS, 8 GB
    LU Count : 4 [0x0015560B] [0x00000800] [0x00000800] [0x00003C00]
    WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [65536], Out: 1048576, Sector Size: 4096
    Processing [rawprogram0.xml]
    Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Processing [rawprogram1.xml]
    Writing [xbl.elf] -> [xbl] ...Done
    Writing [xbl_config.elf] -> [xbl_config] ...Done
    Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Processing [rawprogram2.xml]
    Writing [xbl.elf] -> [xbl] ...Done
    Writing [xbl_config.elf] -> [xbl_config] ...Done
    Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Processing [rawprogram3.xml]
    Writing [tz.mbn] -> [tz] ...Done
    Writing [aop.mbn] -> [aop] ...Done
    Writing [abl.elf] -> [abl] ...Done
    Writing [bksecapp.mbn] -> [bksecapp] ...Done
    Writing [keymaster64.mbn] -> [keymaster] ...Done
    Writing [cmnlib.mbn] -> [cmnlib] ...Done
    Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
    Writing [apdp.mbn] -> [apdp] ...Done
    Writing [msadp.mbn] -> [msadp] ...Done
    Writing [devcfg.mbn] -> [devcfg] ...Done
    Writing [storsec.mbn] -> [storsec] ...Done
    Writing [sec.elf] -> [secdata] ...Done
    Writing [vaultkeeper.mbn] -> [vk] ...Done
    Writing [hyp.mbn] -> [hyp] ...Done
    Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
    Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Resetting device...Done
    Operation Finished.



    Checking for existing devices...Found
    Port : Qualcomm HS-USB QDLoader 9008 (COM61)
    Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
    Opening Port...OK
    Init Handshake Sequence...OK
    Hardware ID : E1500900 [SM6150] 00002000
    OPK_DATA : E6C467292D5EE31FC2928B69166625C3E8C02016F4830F274D39A8AC38B05A4E
    Initializing Protocol...OK
    Sending Loader [prog_firehose_ddr.elf]...Done
    Executing Loader...OK
    Detecting Chip Type...OK
    Using Alternate Method...
    Hardware : SM6150, UFS, 128 GB
    LU Count : 4 [0x01DC5C00] [0x00000800] [0x00000800] [0x00003C00]
    WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [65536], Out: 1048576, Sector Size: 4096
    Processing [rawprogram0.xml]
    Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Processing [rawprogram1.xml]
    Writing [xbl.elf] -> [xbl] ...Done
    Writing [xbl_config.elf] -> [xbl_config] ...Done
    Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Processing [rawprogram2.xml]
    Writing [xbl.elf] -> [xbl] ...Done
    Writing [xbl_config.elf] -> [xbl_config] ...Done
    Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Processing [rawprogram3.xml]
    Writing [tz.mbn] -> [tz] ...Done
    Writing [aop.mbn] -> [aop] ...Done
    Writing [abl.elf] -> [abl] ...Done
    Writing [bksecapp.mbn] -> [bksecapp] ...Done
    Writing [keymaster64.mbn] -> [keymaster] ...Done
    Writing [cmnlib.mbn] -> [cmnlib] ...Done
    Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
    Writing [apdp.mbn] -> [apdp] ...Done
    Writing [msadp.mbn] -> [msadp] ...Done
    Writing [devcfg.mbn] -> [devcfg] ...Done
    Writing [storsec.mbn] -> [storsec] ...Done
    Writing [sec.elf] -> [secdata] ...Done
    Writing [vaultkeeper.mbn] -> [vk] ...Done
    Writing [hyp.mbn] -> [hyp] ...Done
    Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
    Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
    Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
    Applying Patches................Done
    Resetting device...Done
    Operation Finished.

    Link ẩn vui lòng Đăng nhập hoặc Đăng ký

    Link ẩn vui lòng Đăng nhập hoặc Đăng ký



    Link ẩn vui lòng Đăng nhập hoặc Đăng ký
     
    kithuatmobile, 12/11/19
    #1
  2. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Thêm A70 A705F Xóa Knox MDM

    [​IMG]

    [​IMG]

    [​IMG]
     
    kithuatmobile, 4/12/19
    #2
  3. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    A70 A&05F Knox Gpay Remove Done X2

    Mã:
    Operation    : Multi Flash
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info    : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1500900 [SM6150] 00002000
OPK_DATA    : E6C467292D5EE31FC2928B69166625C3E8C02016F4830F274D39A8AC38B05A4E
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Detecting Chip Type...OK
Using Alternate Method...
Hardware    : SM6150, UFS, 128 GB
LU Count    : 4 [0x01DC5C00] [0x00000800] [0x00000800] [0x00003C00]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [65536], Out: 1048576, Sector Size: 4096
Processing [rawprogram0.xml]
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [tz.mbn] -> [tz] ...Done
Writing [aop.mbn] -> [aop] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [bksecapp.mbn] -> [bksecapp] ...Done
Writing [keymaster64.mbn] -> [keymaster] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [apdp.mbn] -> [apdp] ...Done
Writing [msadp.mbn] -> [msadp] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [sec.elf] -> [secdata] ...Done
Writing [vaultkeeper.mbn] -> [vk] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.

Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info    : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1500900 [SM6150] 00002000
OPK_DATA    : E6C467292D5EE31FC2928B69166625C3E8C02016F4830F274D39A8AC38B05A4E
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Detecting Chip Type...OK
Using Alternate Method...
Hardware    : SM6150, UFS, 128 GB
LU Count    : 4 [0x01DC5C00] [0x00000800] [0x00000800] [0x00003C00]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [65536], Out: 1048576, Sector Size: 4096
Processing [rawprogram0.xml]
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [tz.mbn] -> [tz] ...Done
Writing [aop.mbn] -> [aop] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [bksecapp.mbn] -> [bksecapp] ...Done
Writing [keymaster64.mbn] -> [keymaster] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [apdp.mbn] -> [apdp] ...Done
Writing [msadp.mbn] -> [msadp] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [sec.elf] -> [secdata] ...Done
Writing [vaultkeeper.mbn] -> [vk] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
     
    kithuatmobile, 28/12/19
    #3
  4. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Galaxy A70 A705F U4 Remove Knox
    Mã:
    Operation    : Multi Flash
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM31)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1500900 [SM6150] 00002000
OPK_DATA    : E6C467292D5EE31FC2928B69166625C3E8C02016F4830F274D39A8AC38B05A4E
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Detecting Chip Type...OK
Using Alternate Method...
Hardware    : SM6150, UFS, 128 GB
LU Count    : 4 [0x01DC5C00] [0x00000800] [0x00000800] [0x00003C00]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [65536], Out: 1048576, Sector Size: 4096
Processing [rawprogram0.xml]
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl] ...Done
Writing [xbl_config.elf] -> [xbl_config] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [tz.mbn] -> [tz] ...Done
Writing [aop.mbn] -> [aop] ...Done
Writing [abl.elf] -> [abl] ...Done
Writing [bksecapp.mbn] -> [bksecapp] ...Done
Writing [keymaster64.mbn] -> [keymaster] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [apdp.mbn] -> [apdp] ...Done
Writing [msadp.mbn] -> [msadp] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [sec.elf] -> [secdata] ...Done
Writing [vaultkeeper.mbn] -> [vk] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp] ...Done
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 5.2
     
    kithuatmobile, 13/1/20
    #4
  5. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Galaxy A70 A705FN Remove Knox Done

    [​IMG]
    [​IMG]
     
    kithuatmobile, 9/2/20
    #5
  6. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Samsung A70 A705F A705FN Remove Knox GPAY

    [​IMG]
    [​IMG]
    [​IMG]
     
    kithuatmobile, 27/2/20
    #6
  7. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Samsung A70 A705F A705FN Remove Knox GPAY


    [​IMG]
    [​IMG]
     
    kithuatmobile, 13/3/20
    #7

trang này