Xóa mã bảo vệ + Bypass FRP Vsmart Joy 1

Mã:

Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM19)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1B00600 [8937] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : vsmart Joy 1 [PQ4001]
Software    : 2.0.0_20191021-0753, 53 [Mon Oct 21 07:53:59 +07 2019]
Android Ver.    : 9
Patch Level    : 2019-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.