Tìm nhanh Forum - tại đây !!

↑ ↓
Welcome

+ Chào mừng bạn đến với diễn đàn thông tin dịch vụ Việt Nam

+ Chúng tôi có tất cả các dịch vụ Online từ xa qua Teamview - Active box , Dongle , Rom Test chuẩn cứu máy - Và thông tin giải pháp phần mềm miễn phí

Meizu M5s Flyme Account | Lock Screen

Thảo luận trong 'MEIZU' bắt đầu bởi kithuatmobile, 17/8/19.

  1. kithuatmobile

    kithuatmobile
    Chuyên Doanh

    Meizu M5s Flyme Account | Lock Screen

    Meizu M5s Khóa Tài Khoản Flyme,Mở Khóa Tài Khoản Thành Công
    Meizu M5s Remove Flyme Account By MRT

    Mã:
    @thanhnamPDAviet
       Disconnect Mobile...
       Re-Put the Mobile Bettery...
       Then Connect your Phone to Computer again....
       Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
       Get Mobile Port is:  COM6
    >>> Device driver identification:
       MediaTek USB Port
    >>> Mobile Has Connect...
       CPU_NAME: MT6735
    >>> Reading Mobile Hardware Info...Success
       HW_Inf:  8A00    SW_Inf:  CA00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
       The Flash Hardware Info:RE1BMB
    >>> Downloading Boot2 To Mobile Phone...
    >>> Initializationing Mobile Hardware Parameter...Success
       =====================Flash Type(eMMC)==============
       Flash   Size: 0x00000003A3E00000 -> 14910M
       Flash     ID: 0x150100524531424D
       Flash   Name: Samsung_Unknow
       Flash symbol: RE1BMB
    >>> Software Auto Switch Hight Speed Has Enable...
    >>> Swich Mobile to Hight Speed Re\Wr Port...
       Get Mobile Port is:  COM95
    >>> Device driver identification:
       MediaTek DA USB VCOM (Android)
    >>> Reading Mobile Map Data...Success
    >>> Extracting valid data from partition data...
    >>> Analysis of mobile phone data...
    >>>>Reading Mobile Org Info....
    Success
    >>>>Moving Mobile Info...
       This Phone Support CDMA
       SN has Change to :612C\Z116K01
       This Phone Support CDMA
       SN has Change to :01D581    SN has Change to :01D581>>>>Formating Mobile USER Data...
       ADD(HEX):0x00B6000000    Size(HEX):0x02ECD80000   
       Corresponding operation completed!!!
       After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Link ẩn vui lòng Đăng nhập hoặc Đăng ký




    Link ẩn vui lòng Đăng nhập hoặc Đăng ký
     

trang này