Xiaomi Mi A2 xóa FRP Online ok

Platform: XIAOMI
Selected model: MI A2
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM17
Mode: Qualcomm 9008
Connecting...
Operation was failed!
Backup saved as XIAOMI_MI A2_26-03-2020_18-49-50.dump file
Performed by 1.8.7 Software version.
Platform: XIAOMI
Selected model: MI A2
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM17
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0008C0E100000000
QC CPU: Snapdragon 660 SDM660
QC SW VER: 00000002
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 08001000
Checking request..
Reading partition...
Reading info...
Android version: 10
Display ID: QKQ1.190910.002 V11.0.6.0.QDIMIXM
Firmware version: V11.0.6.0.QDIMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as XIAOMI_MI A2_26-03-2020_18-50-34.dump file

 

Device : Xiaomi Mi A2
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : QKQ1.190910.002 V11.0.6.0.QDIMIXM, V11.0.6.0.QDIMIXM [Tue Mar 10 19:55:26 WIB 2020]
Android Ver. : 10
Patch Level : 2020-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.